What Can you do as the Furnace Breakdowns before Calling a Technician?

best furnace repair Brooklyn, NY

Since none of us want to be left in the cold during the winter days, here is the list of things you could try and check before you approach the best furnace repair Brooklyn, NY.

Start your inspection with the circuit breaker. Any tripped circuit breaker can cause many problems with the electrical system. And then ensure that the power switch of your furnace is turned on and if not do it. Suppose your furnace has a fuse that can be found on the side of the unit covered in a metal housing. Check whether the fuse is burnt or not by lifting the housing. If the fuse is burnt, it can mean many problems with the system that needs to be replaced with the help of an expert professional. Call an experienced furnace installation company in Brooklyn, NY, for assistance.

Most new homes exhaust the vents through the wall taking in fresh air rather than using a chimney. This fresh air intake and exhaust should not be blocked by anything. Have a regular check for the wall being covered with dirt, debris, or any other kind of leaves or branches. Ensure that there is no moisture found, which can potentially damage the unit. If any problem is detected, contact a professional to check and solve the issue.

The thermostat setting left unchecked or changed by mistake can result in such problems too. Ensure the thermostat being set at a heat position at a high-temperature position for the furnace to turn on. Ensure that the thermostat has fresh batteries. Check the guide or manual provided for any troubleshooting tips. Call a technician to ask about the operation, if it’s a new thermostat.

Leaving the air filter unchanged for a longer period of more than three months can result in issues like furnace startup and very little air blown due to the blocks by dirt and dust. Ensure to add this step as a regular part of house maintenance.

If your furnace uses a pilot light, then ensure that it is lit. If not, with the manual guide provided, try relighting it or call a technician. Also, one has to ensure that the flame sensor is clean.

Ensure that the gas valve responsible for proper gas supply to the furnace is turned on completely instead of partially. 

If you still couldn’t find the problem, then contact an expert professional to carry out the best furnace repair Brooklyn, NY,like VVOY Service Hub.

Leave a comment